Skip to main content

Module setup

Module setup 

Source
Expand description

Serial API setup subcommands.

Constantsยง

GET_RF_REGION
The RF region.
GET_SUPPORTED
Which subcommands the controller supports.
NODE_ID_LONG
Node ids are two bytes (needed for Long Range).
NODE_ID_SHORT
Node ids are one byte.
SET_NODE_ID_TYPE
Set 8- or 16-bit node ids on the Serial API.
SET_RF_REGION
Set the RF region (needs a soft reset to apply).
SET_TX_STATUS_REPORT
Enable or disable transmit reports on SendData callbacks.