Skip to content

zigbee-bridge

Pulzar open source

zigbee-bridge

A Zigbee coordinator stack and Zigbee to MQTT bridge in Rust. One static binary with no runtime, small enough for routers and gateways, with Home Assistant discovery.

Latest releasev0.2.0x86_64aarch64mipsel
Terminal window
VERSION=0.2.0
ARCH=$(uname -m) # x86_64 or aarch64
BASE=https://github.com/pulzar-net/zigbee-bridge/releases/download/v$VERSION
curl -fsSLO "$BASE/zigbee-bridge-v$VERSION-$ARCH-unknown-linux-musl"
curl -fsSLO "$BASE/SHA256SUMS"
sha256sum --check --ignore-missing SHA256SUMS
sudo install -m 0755 "zigbee-bridge-v$VERSION-$ARCH-unknown-linux-musl" /usr/local/bin/zigbee-bridge
zigbee-bridge --version

sha256sum --check must print OK for the file you downloaded before you install it.

Then follow getting started to pair a device, or install it as a service.

zigbee-bridge is 0.x: the whole stack is tested in CI against a coordinator simulator, but no release has been tested on real hardware yet.

FeatureState
Silicon Labs EmberZNet 7.4 and 8.x coordinatorsDone0.1.0
Zigbee 3.0 trust center, interview, reporting, Home Assistant discoveryDone0.1.0
Backup and restore in the open coordinator backup formatDone0.1.0
Texas Instruments Z-Stack and ConBee/RaspBee coordinatorsDone0.2.0
Channel change, device firmware updates (OTA), cross-family restoreDone0.2.0
Testing on real coordinators and devicesIn progress
Manufacturer-specific clusters, groups and scenesPlanned