Skip to content

matter-bridge

Pulzar open source

matter-bridge

A Matter controller and Matter to MQTT bridge in Rust, on rs-matter. It commissions devices onto a fabric of its own and publishes every attribute and event, with Home Assistant discovery.

Latest releasev0.1.0x86_64aarch64mipsel
Terminal window
VERSION=0.1.0
ARCH=$(uname -m) # x86_64 or aarch64
BASE=https://github.com/pulzar-net/matter-bridge/releases/download/v$VERSION
curl -fsSLO "$BASE/matter-bridge-$ARCH-linux-musl"
curl -fsSLO "$BASE/SHA256SUMS"
sha256sum --check --ignore-missing SHA256SUMS
sudo install -m 0755 "matter-bridge-$ARCH-linux-musl" /usr/local/bin/matter-bridge
matter-bridge --version

sha256sum --check must print OK for the file you downloaded before you install it.

Then follow getting started to commission a device, or install it as a service.

matter-bridge is 0.x: CI commissions and controls the CSA’s reference device on every commit, but commercial devices have not been tested yet.

FeatureState
Commissioning over IP; read, write, invoke, events; subscriptionsDone0.1.0
Commissioning over Bluetooth LE with Wi-Fi credentials (simulated controllers)Done0.1.0
Thread credentials (tested up to the request; no Thread device in CI)Done0.1.0
Groups; an intermediate CA under a root held elsewhereDone0.1.0
Device attestation verificationIn progress
More than 64 live nodesIn progress
OTA, sleepy (ICD) devices, exposing other devices as a Matter bridgePlanned