Skip to content

RAK7266 WisGate Edge Pro

Image built by CI

RAK7266 — WisGate Edge Pro (outdoor), 8-channel, no LTE.

Board IDrak7266
ImageImage built by CI
InstallFrom the running system or the bootloader
OpenWrt25.12.6, ramips/mt76x8, mipsel_24kc
FeaturesLoRaWAN, WiFi
LoRa radio8 channels, one concentrator on SPI
Concentrator partsx1302_spi, rak_2287
Slot 0SPI /dev/spidev0.1, reset GPIO 11
GNSSNone
BluetoothNone
Local screenNone
USB device portNone
LAN portsNone
Built-in add-onsNone

Panel lights

LabelColourRolesysfs
Statusrgbcloudrgb:status
LoRa 1greenloragreen:lora-1
LoRa 2greenloragreen:lora-2
ETHgreenethernetgreen:lan
WLANorangewifiorange:wlan

Install

This board boots from soldered flash. A unit already running PulzrOS upgrades from its console or withsysupgrade (Firmware updates).

Notes from board.conf

Another RAK636 board, and as far as its radio goes the RAK7268V2's: ChirpStack Gateway OS builds it from the one rakwireless_rak636 device and drives it with the RAK7268V2's concentrator package (ChirpStack's OpenWrt feed, MIT): a RAK2287-class SX1302 on /dev/spidev0.1, reset on GPIO 11. RAK636 is a module, so its LEDs, buttons and flash map are the module's whatever the enclosure; that is why one image serves every RAK636 board, and why this one is the RAK7268V2's with the Lite's breathing light left out.

Not yet run on a unit.

Source: boards/rak7266/board.conf