RAK7266 WisGate Edge Pro
Image built by CI
RAK7266 — WisGate Edge Pro (outdoor), 8-channel, no LTE.
| Board ID | rak7266 |
|---|---|
| Image | Image built by CI |
| Install | From the running system or the bootloader |
| OpenWrt | 25.12.6, ramips/mt76x8, mipsel_24kc |
| Features | LoRaWAN, WiFi |
| LoRa radio | 8 channels, one concentrator on SPI |
| Concentrator part | sx1302_spi, rak_2287 |
| Slot 0 | SPI /dev/spidev0.1, reset GPIO 11 |
| GNSS | None |
| Bluetooth | None |
| Local screen | None |
| USB device port | None |
| LAN ports | None |
| Built-in add-ons | None |
Panel lights
| Label | Colour | Role | sysfs |
|---|---|---|---|
| Status | rgb | cloud | rgb:status |
| LoRa 1 | green | lora | green:lora-1 |
| LoRa 2 | green | lora | green:lora-2 |
| ETH | green | ethernet | green:lan |
| WLAN | orange | wifi | orange:wlan |
Install
This board boots from soldered flash. A unit already running PulzrOS upgrades from its console or withsysupgrade (Firmware updates).
Notes from board.conf
Another RAK636 board, and as far as its radio goes the RAK7268V2's: ChirpStack Gateway OS builds it from the one rakwireless_rak636 device and drives it with the RAK7268V2's concentrator package (ChirpStack's OpenWrt feed, MIT): a RAK2287-class SX1302 on /dev/spidev0.1, reset on GPIO 11. RAK636 is a module, so its LEDs, buttons and flash map are the module's whatever the enclosure; that is why one image serves every RAK636 board, and why this one is the RAK7268V2's with the Lite's breathing light left out.
Not yet run on a unit.
Source: boards/rak7266/board.conf