RAK7267 WisGate Soho Pro
Image built by CI
RAK7267 — WisGate Soho Pro, 8-channel, one RAK5146 on USB, GNSS.
| Board ID | rak7267 |
|---|---|
| Image | Image built by CI |
| Install | From the running system or the bootloader |
| OpenWrt | 25.12.6, ramips/mt76x8, mipsel_24kc |
| Features | LoRaWAN, WiFi, GNSS |
| LoRa radio | 8 channels, one concentrator on USB |
| Concentrator part | sx1302_usb, rak_5146 |
| Slot 0 | USB /dev/ttyACM0 |
| GNSS | Built in |
| Bluetooth | None |
| Local screen | None |
| USB device port | None |
| LAN ports | None |
| Built-in add-ons | None |
Install
This board boots from soldered flash. A unit already running PulzrOS upgrades from its console or withsysupgrade (Firmware updates).
Notes from board.conf
Another RAK636 board: ChirpStack Gateway OS builds it from the one rakwireless_rak636 device, and ChirpStack's OpenWrt feed (MIT, chirpstack-concentratord-target-rak7267) drives its radio as a rak_5146 on the first CDC-ACM port with GNSS, no reset line (the card's own STM32 owns the SX1303's reset, as on the RAK7289CV2). RAK636 is a module, so its LEDs, buttons and flash map are the module's; this is the RAK7289CV2's image (its USB concentrator support) with one card, no power board and no modem.
One card means one CDC-ACM device, so the slot names /dev/ttyACM0 directly; the two-card Pro needs PULZR_LORA_USB_PORTS to tell its cards apart.
Not yet run on a unit.
Source: boards/rak7267/board.conf