RAK7268V2 WisGate Edge Lite 2
Image built by CI
RAK7268V2 — WisGate Edge Lite 2 V2, 8-channel, no LTE.
| Board ID | rak7268v2 |
|---|---|
| Image | Image built by CI |
| Install | From the running system or the bootloader |
| OpenWrt | 25.12.6, ramips/mt76x8, mipsel_24kc |
| Features | LoRaWAN, WiFi |
| LoRa radio | 8 channels, one concentrator on SPI |
| Concentrator part | sx1302_spi, rak_2287 |
| Slot 0 | SPI /dev/spidev0.1, reset GPIO 11 |
| GNSS | None |
| Bluetooth | None |
| Local screen | None |
| USB device port | None |
| LAN ports | None |
| Built-in add-ons | None |
Panel lights
| Label | Colour | Role | sysfs |
|---|---|---|---|
| Status | rgb | cloud | rgb:status |
| LoRa 1 | green | lora | green:lora-1 |
| LoRa 2 | green | lora | green:lora-2 |
| ETH | green | ethernet | green:lan |
| WLAN | orange | wifi | orange:wlan |
Install
This board boots from soldered flash. A unit already running PulzrOS upgrades from its console or withsysupgrade (Firmware updates).
Notes from board.conf
The RAK7268CV2 without its modem: the same RAK636 module (MT7628AN, 32MB SPI NOR) and the same radio. ChirpStack's OpenWrt feed (MIT, its chirpstack-concentratord-target-rak7268v2 package) drives it exactly as this repo drives the CV2 -- a RAK2287-class SX1302 on /dev/spidev0.1, reset on GPIO 11 -- and ChirpStack Gateway OS builds every RAK636 board from the one device profile. So this is the CV2's device support and image with the cellular side left out, not a port of its own.
Not yet run on a V2 unit. The CV2's header has what was checked on its hardware; harvest a V2 (scripts/harvest-device.sh) before calling it supported in docs/src/content/docs/boards.md.
Gateway OS also lists a second, optional slot: a RAK5148 2.4 GHz LoRa card on USB. PulzarOS has no 2.4 GHz plan, so it is not declared.
Source: boards/rak7268v2/board.conf