Skip to content

Raspberry Pi 3

Image built by CI

Raspberry Pi 3 B / B+.

Board IDrpi3
ImageImage built by CI
InstallSD card
OpenWrt25.12.6, bcm27xx/bcm2710, aarch64_cortex-a53
FeaturesLoRaWAN, Cellular, WiFi, GNSS, Speed test
LoRa radioProbed: SPI, USB or UART
Slot 0probed on every bus, editable in the console
GNSSProbed
BluetoothOn the UART
Local screenHDMI
USB device portNone
LAN portsNone
Built-in add-onsNone

Panel lights

LabelColourRolesysfs
PWRredpowerPWR
ACTgreenstatusACT

Install

Write the image to an SD card with any writer, or:

Terminal window
./flash.sh --download rpi3

See Flashing.

Notes from board.conf

Development and small-site board. No USB 3, and the USB controller is shared with the NIC — so a USB concentrator here competes with ethernet for bandwidth. That is worth knowing when siting one, but it is not a reason to refuse the configuration: it works, and it is what somebody will have on the bench. Detection treats every bus equally.

Source: boards/rpi3/board.conf