Skip to content

RAK7268CV2 WisGate Edge Lite 2

Image built by CI

RAK7268CV2 — WisGate Edge Lite 2 V2, 8-channel, with LTE.

Board IDrak7268cv2
ImageImage built by CI
InstallFrom the running system or the bootloader
OpenWrt25.12.6, ramips/mt76x8, mipsel_24kc
FeaturesLoRaWAN, Cellular, WiFi
LoRa radio8 channels, one concentrator on SPI
Concentrator partsx1302_spi, rak_2287
Slot 0SPI /dev/spidev0.1, reset GPIO 11
GNSSNone
BluetoothNone
Local screenNone
USB device portNone
LAN portsNone
Built-in add-onsNone

Panel lights

LabelColourRolesysfs
Statusrgbcloudrgb:status
LoRa 1greenloragreen:lora-1
LoRa 2greenloragreen:lora-2
ETHgreenethernetgreen:lan
WLANorangewifiorange:wlan

Install

This board boots from soldered flash. A unit already running PulzrOS upgrades from its console or withsysupgrade (Firmware updates).

The first install, recovery and the hardware record:boards/rak7268cv2/openwrt/README.md.

Notes from board.conf

Verified against a stock unit (WisGateOS 2.2.16) on 2026-09-16 — the raw facts are in openwrt/README.md. Internally it is a RAK636 module: MT7628AN, 32MB SPI NOR, one SX1302 + two SX1250s, Quectel EG95 on USB, and an SD card on the pins the other four ethernet ports would have used.

OpenWrt has no device for it, so the device support lives in openwrt/ beside this file, built into an ImageBuilder by scripts/device-imagebuilder.sh. Installed from U-Boot over TFTP; see openwrt/README.md.

Source: boards/rak7268cv2/board.conf