Raspberry Pi 3
Image built by CI
Raspberry Pi 3 B / B+.
| Board ID | rpi3 |
|---|---|
| Image | Image built by CI |
| Install | SD card |
| OpenWrt | 25.12.6, bcm27xx/bcm2710, aarch64_cortex-a53 |
| Features | LoRaWAN, Cellular, WiFi, GNSS, Speed test |
| LoRa radio | Probed: SPI, USB or UART |
| Slot 0 | probed on every bus, editable in the console |
| GNSS | Probed |
| Bluetooth | On the UART |
| Local screen | HDMI |
| USB device port | None |
| LAN ports | None |
| Built-in add-ons | None |
Panel lights
| Label | Colour | Role | sysfs |
|---|---|---|---|
| PWR | red | power | PWR |
| ACT | green | status | ACT |
Install
Write the image to an SD card with any writer, or:
./flash.sh --download rpi3See Flashing.
Notes from board.conf
Development and small-site board. No USB 3, and the USB controller is shared with the NIC — so a USB concentrator here competes with ethernet for bandwidth. That is worth knowing when siting one, but it is not a reason to refuse the configuration: it works, and it is what somebody will have on the bench. Detection treats every bus equally.
Source: boards/rpi3/board.conf